Wuxi YBT Machinery Equipment Co.,Ltd.
We will try do our best for make best quality machine!
Add to Cart
Grain bin silo vertical column machine silo stiffener production machine line
Technical parameters
| Pipe diameter | 1000-6000mm |
| Pipe length | 1-12m |
| Material | Galvanized steel strip, 2.0-3.0mm thick, 300mm wide |
| Working speed | 1-35m/min, adjustable |
| Spiral pitch | 230mm |
| Lock seam | Double locked |
| Motor power | About 33.0KW |
| Dimension | 3900 X 1600 X 1400mm |
10T hydraulic decoiler:
Steel coil width: from 1250 mm to 1500 mm;
Internal diameter of coil: variable, from 470 mm to 620 mm
Maximal out diameter:1600mmOil cylinder dia:120mm
Working speed: 0-15m/min adjustable
Main motor power: 7.5KW AC motor
Hydraulic power: 5.5kw
Speed controlled by frequency converter brand: Yaskawa
De-coiler should be with Loop control and hold down, and with baffle for forbid coil fall down
The decoiler has 4 segments
Material of the profile: 195-235Mpa GI or carbon steel
Thickness range: 3.0-4.0mm
Maximum production speed: not less than 18 meters per minute (for non-perforated profiles, excluding cutting)
Main motor power:60kw, AC motor, motor inside of main machine (Brand: Guomao of China)
Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
Roll station:20 stations
Roller material:Gcr15 bearing material chrome plated surface with hardness 58-62 degree ,CNC,
Shaft diameter: ￠150mm material: SAE1045 with quenching and tempering
Transmission: by gear box 200*500(outside is cast iron, surface needed polish and paint. Inside is 60# forge and press metal)
The punches and dollies will be CR-12, hardness HRC 58-62 and chrome coating both punches and dolies should be easily replaceable without requiring disassembly of complete units.
The whole punching operation should be automated and controlled by a program installed in the PC which is located in the operator's console.
Hydraulic power: 5.5kw
Working pressure: 12-16Mpa
Machine adopt hydraulic cutting
Cutting after forming: Cut the sheet after roll forming to required length
Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
Material of blade: CR12with heat treatment
Length measuring: Automatic length measuring
Tolerance of length: 4700mm+/- 2mm
Hydraulic power: 11kW
Working pressure: 20-25Mpa adjustable
Solenoid valve: 3 group
Hydraulic oil: 46# hydraulic oil
Color: Blue (or base on customer request)